Skip to content
Cloudflare Docs

Uptycs

Cloudflare Zero Trust can integrate with Uptycs to require that users connect to certain applications from managed devices. This service-to-service posture check uses the WARP client to read endpoint data from Uptycs. Devices are identified by their serial numbers.

Prerequisites

  • Uptycs agent is deployed on the device.

  • Cloudflare WARP client is deployed on the device. For a list of supported modes and operating systems, refer to Service providers.

1. Obtain Uptycs Settings

The following Uptycs values are needed to set up the Uptycs posture check:

  • Client key
  • Client Secret
  • Customer ID

To obtain these values:

  1. Open your Uptycs console.
  2. Go to Account Settings > API Key.
  3. Generate and download your .json file. This file will contain your Client key, Client Secret and Customer ID.

2. Add Uptycs as a service provider

  1. Go to Settings > WARP Client.
  2. Scroll down to Device posture providers and select Add new.
  3. Select Uptycs.
  4. Give your provider a name. This name will be used throughout the dashboard to reference this connection.
  5. Enter the Client ID, Client secret and Customer ID as you noted down above.
  6. Select a Polling frequency for how often Cloudflare Zero Trust should query Uptycs for information.
  7. Select Save.

You will see the new provider listed under Settings > WARP Client > Device posture providers. To ensure the values have been entered correctly, select Test.

3. Configure the posture check

  1. In Zero Trust ↗, go to Settings > WARP Client > Service provider checks.
  2. Select Add new.
  3. Select the Uptycs provider.
  4. Configure a device posture check and enter any name.
  5. Select Save.

Next, go to Logs > Posture and verify that the service provider posture check is returning the expected results.

Device posture attributes

SelectorDescription
ScoreZero Trust score assigned to the device by Uptycs
Cloudflare DashboardDiscordCommunityLearning CenterSupport Portal